Scientific Atlanta Explorer 1850 User Manual page 7

3250HD Back Panel Overview
1 Serial Number
2 1394 FireWire*
3 Optical Audio Out*
4 DVI*
5 IR*
6 S-Video Out
7 YPbPr Out
8 Digital Audio Out
9 Video & Audio Out
10 Cable Out
11 Audio Out (L and R)
12 Cable In
13 Bypass*
14 AC Switched Outlet
15 AC Power Input
*If available. Contact EATEL for more information.
Located in the left corner of the bar code. EATEL may ask for this number if your
system requires troubleshooting.
Connect to optional 1394-equipped (FireWire) devices. This connector is reserved
for future use and may not be available on all 3250HD models.
Connect an optical cable to send a digital audio signal to a surround-sound
received or the digital audio device. This connector may not be available
on all STB models.
Connect to the DVI (Digital Video Interface) input port on your HDTV.
This port provides digital video signals to the HDTV.
Connect the IR Blaster cable to use with the optional VCR Commander
Connect an S-Video cable to send an S-Video signal to your TV or VCR. This signal
is standard definition, but higher quality than other SDTV connections.
Connect the HDTV (Y, Pb, Pr) component output ports to the HDTV input
on your HDTV. You must use these ports to provide HDTV signals to a
surround-sound receiver or other digital audio device.
Connect an RCA cable to send a digital audio signal to a surround-sound receiver
or other digital audio device.
Connect an RCA cable to Video Out and Left/Right Audio Out to send
analog video and audio signals to a standard VCR. This signal is SDTV.
Connect a coaxial cable to Cable Out to send analog audio and video
signals to a TV or VCR. These signals are SDTV video with mono audio.
Connect RCA cables to Audio Out to send analog audio signals (left and right) to a
stereo receiver or a TV with stereo outputs.
Connect to the coaxial cable coming from the wall.
Connect an optional RF Bypass module to the set-top. This module allows viewing
one channel while recording another.
Connect the AC power cord from another device, such as a TV.
Connect the STB to an AC electrical outlet using the cord provided.
™
Continued on Next Page
service.
33