Download Print this page

Scientific Atlanta Explorer 1850 User Manual page 13

Digital set-top box (stb) diagrams
Hide thumbs Also See for Explorer 1850:

Advertisement

8300HDC Back Panel Overview
1 Cable In
2 Cable Out
3 HDTV
4 Digital Audio Out
5 Out 2 (Secondary
Video/Audio Out)
6 Audio Out
(Left and Right)
7 Optical Audio
Output
8 S-Video Out
9 IR
10 HDMI
11 M-Card Interface
12 SATA
13 1394 Firewire
14 AC Outlet
15 AC Power Input
Connects to the coaxial cable coming from the wall.
Connects to a coaxial cable that sends analog audio and video signals to a TV
or VCR. These signals are standard-definition TV (SDTV) video and stereo audio.
Connects to the component video input (YPbPr) on the HDTV, when in HD mode.
When in SD mode, the Y/V portion of the component video output connects to the
composite video input of a TV.
Connects to an RCA cable that sends a digital audio signal to a surround-sound
receiver or other digital audio device.
Connects to either a VCR for archiving saved content from the DVR or connects
to another set of inputs (composite) on your TV.
Connects to RCA cables that send analog audio signals (left and right)
to the stereo inputs on a TV.
Connects to an optical cable that sends a digital audio signal to a surround-sound
receiver or other digital audio device.
Connects to an S-Video cable that sends an S-Video signal to your TV or VCR.
This signal is standard definition, but higher quality than other SDTV connections.
Connector reserved for future use.
Connects an HDMI™ cable to the HDMI input of an HDTV. HDMI supports
both digital audio and video. May be used to connect to a DVI interface using
an HDMI-to-DVI adaptor for video and separate audio connections. Any of the
following audio connections may be used: Digital Audio Out (4); Audio Out:
Left and Right (6); or Optical Audio Output (7).
Installed by your service provider.
Connect to an external Serial ATA (eSATA) hard disk drive for expanded recording
capability. Please check with EATEL for a list of approved hard drive models for use
with the 8300HDC.
Connects to display devices that are equipped with a 1394 input.
Connects to the AC power cord from another device, such as a TV.
Connects to the power cord to deliver power to the DVR.
39

Advertisement

loading