Warning/Caution Decals - CYBEX VR1 Owner's And Service Manual

Seated leg curl

Hide thumbs Also See for VR1:

Owner's manual (28 pages)

Owner's and service manual (40 pages)

Owner's and service manual (38 pages)

Table Of Contents

Table of Contents

Facility Safety Precautions

•

Read the Owner's Manual carefully before assembling, servicing or using the equipment.

•

Securely anchor each machine to the ﬂ oor using the anchor holes provided in each

machine.

NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a pro-

fessional contractor.

NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8" grade 2 bolts or

better).

NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any

leg or frame not in contact with surface using ﬂ at washers.

•

Make sure that each machine is set up and operated on a solid level surface.

equipment on an uneven surface.

•

Make sure that all users are properly trained on how to use the equipment.

•

Make sure there is enough room for safe access and operation of the equipment.

•

Perform regular maintenance checks on the equipment. Also pay close attention to all areas most

susceptible to wear, including (but not limited to) cables, pulleys, belts and grips.

•

Immediately replace worn or damaged components. If unable to immediately replace worn or

damaged components, then remove from service until the repair is made.

•

Use only Cybex supplied components to maintain/repair the equipment.

•

Keep a repair log of all maintenance activities.

•

Inspect all cables and belts and connections prior to use.

worn, frayed or damaged.

NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular

maintenance is performed.