Safety Alert Symbol; Signal Words; Safety Decals - Empyre Pro Series 200 Intallation And Operation Instructions

Pro series, phase ii wood gasifier
Table of Contents

Advertisement

SAFETY

Safety Alert Symbol

The Safety Alert symbol identifies
important safety messages in the
manual and on the furnace. When
this symbol is present, be alert to the
possibility of injury or death. Follow all instructions
in the safety message given. This symbol means
attention, be alert, and your safety is involved.
Why is SAFETY important to you? Three very
important reasons:
1.
Accidents disable and kill.
2.
Accidents cost.
3.
Accidents can be avoided.

Signal Words

Note the use of the signal words: DANGER,
WARNING and CAUTION with the safety messages.
The appropriate signal word has been selected
using the following guidelines:
DANGER
DANGER: Indicates an imminently hazardous
situation that, if not avoided, WILL result in death
or serious injury if proper precautions are not
taken.
WARNING
WARNING: Indicates a potentially hazardous
situation that, if not avoided, COULD result in
death or serious injury if proper precautions are
not taken.
CAUTION
CAUTION: Indicates a potentially hazardous
situation that, if not avoided, MAY result in minor or
moderate injury if proper practices are not taken,
or serves as a reminder to follow appropriate
safety practices.
6

Safety Decals

Please read and follow directions to ensure safe
practices when using the Empyre Pro Series
furnace.
1)
DANGER/WARNING/CAUTION
Safety Instructions: Located on the front right
corner below controls.
2)
Furnace Serial Decal - Located on the front
right corner above controls.
3)
ELECTRICAL/INSTALLATION:
Installer Information - Located on outside edge
of rear access door.
4)
CAUTION: THIS LID IS HEAVY. Use both hands.
Lid area may be very hot. Switch blower off
before opening. - Located on centre back fly
ash / flue clean out cover.
5)
WARNING: ELECTROCUTION HAZARD. Always
secure door with latch. Tighten with wrench. -
Located on rear access door above latch.
6)
PRO SERIES 100/200/400 - Located on right
side of furnace on control panel door.
7)
SPECIFICATIONS - Located on outside edge of
rear access door.
EMPYRE PRO SERIES INSTALLATION AND OPERATION MANUAL • 2009

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents