Typical Installation
Figure 1
Insulated
return pipe
Pro Series Furnace
IMPORTANT:
The installation drawings in this manual are typical layouts shown as examples of types of
layouts only. We recommend that you engage a professional plumbing and heating company
to ensure your installation is suitable for your application, will serve your needs and will
conform to all local codes.
The Pro-Fab Industries warranty covers the Empyre Pro Series furnace only and does not
include anything outside of the Empyre Pro Series furnace. Pro-Fab Industries takes NO
responsibility for faulty installations, etc.
These drawings should help in establishing a list of material required for a typical installation.
All parts should be available from your Empyre Pro Series provider. Ask your dealer for a
parts list.
EMPYRE PRO SERIES INSTALLATION AND OPERATION MANUAL • 2009
exchanger
Return
line
Insulated
supply line
Circulating
Heat
pump
Mixing
valve
Existing
furnace
water
heat exchanger
Pump
Filter
INSTALLATION
Hot
tank
Side arm
Under floor
heating pipes
13