Miele KM 443 Operating Instructions Manual page 25

^ Guide the power cable through the
cut out and connect it to the power
supply.
^ Align the cooktop with the spring
clips and press evenly on each side
until it clicks into place. Make sure
that the edge of the cooktop is lying
flat against the countertop around its
whole perimeter.
A special tool is needed to safely
remove the cooktop once it has been
installed.
Installation Instructions
Installing a shelf under the
cooktop.
If a shelf is installed under the cooktop,
there must be at least 2
between the bottom of the cooktop and
the top of the shelf. There should also
1
be a / " (10 mm) air gap for ventilation
2
between the rear of the shelf and the
back wall.
1
/ " (55 mm)
4
25