Vivotek VS7100 User Manual page 49

Camera control panel doesn't
show up in `Fixed Camera' mode
If there is any PTZ camera attached, users should select the"RS485 Settings" as
"PTZ camera" or "Transparent HTTP Tunnel". Users have to configure the camera
id, PTZ driver, and ports settings correctly. The ID is specific to the camera and
necessary for multiple camera control. Please refer to the PTZ camera's user manual for
ID settings. The VS7100 Video Server has three built-in PTZ camera drivers, including
DynaDome/SmartDOME, Lilin PIH-7x00, and Pelco D protocol. For user's convenience,
users can upload their alternative PTZ driver to the Video Server. Please refer to the
maintenance page for more information about how to upload your PTZ driver file.
Note that VS7100 Video Server can support multiple protocols to PTZ cameras. If there
are PTZ camera functions can't work, please see your PTZ camera's user manual to
check if your camera supports these functions.
- 48 -
www.vivotek.com