2.2
Installation overview
Your installation will include the following activities:
Installation task
1
Plan your system
2
Obtain all required equipment and
tools.
3
Site all equipment.
4
Route all cables.
5
Drill cable and mounting holes.
6
Make all connections into equipment.
7
Secure all equipment in place.
8
Power on test the system.
Chapter 2: Planning the installation
2.3
A-Series systems
The A-Series display can be used in a number of system types.
Some examples of which are outlined in this section.
Refer to
-
Chapter 2: Planning the
Core system
installation
- All installation instructions
-
Pack contents on page 16
-
Tools on page 17
-
Chapter 9: Accessories
-
Chapter 4: Location and
mounting
-
Chapter 3: Cables and
connections
-
Bracket mounting on
page 32
-
Panel mounting on
page 35
-
Chapter 3: Cables and
connections
Power IN
-
Bracket mounting on
page 32
-
Panel mounting on
page 35
The core A-Series system consists of:
-
System checks on page 37
•
A-Series multi-function display
•
Internal GPS antenna
•
Sonar transducer on fishfinder (D) models only.
A-Series display
Sonar
transducer
D11355-1
13