Table of Contents
Advertisement
Gateway Configuration
Walled garden
An Internet connection that is restricted prior to authentication. The Frontier
Netgear 7550 gateway has a built-in walled garden, also known as the one-
time setup wizard. When the walled garden/setup wizard is successfully
completed, the customer should be able to surf the Internet.
Configure the
After the physical connections are made, follow these steps to complete the
gateway
one-time setup wizard:
Step
1
Turn the switch labeled Power on the gateway's back panel
to the On position.
Result: The modem boots and the DSL LED begins to blink
(training).
2
Wait for the DSL LED to be solid green (trained).
If ...
The LED is solid green
The LED stays flashing
(slow) green or off,
3
Open a web browser on the computer connected to the
gateway.
Result: The web browser should redirect to the gateway's
one time setup wizard. If it does not, type a known URL (i.e.,
www.frontier.com, or www.yahoo.com) or 192.168.254.254
into the web browser address field.
4
Enter fr0nt13r as the password in the New Password and
Retype New Password fields, and then click the Apply
button on the Modem Password Setting screen.
Business HSI Basic Installation
NETGEAR 7550
Technical Reference Guide v2.0
Action
Then ...
Continue to step 3.
Check the physical
connections.
Continued on next page
10
Hide quick links:
Advertisement
Table of Contents
