Disassembling The S6; Assembling The S6 - Siemens S6 GSM Service Manual

4.2 Disassembling the S6

ESD regulations have to be followed!
1. Remove battery and SIM-Card.
2. Unscrew antenna (1130).
3. Unscrew 2 oval head screws (1150) (Torx 1,8x12).
4. Turn out 2 short flat head screws (1140) (Torx 1,8x8).
5. Remove plastic disks (1155) and turn out the 3 long flat head screws (1145)
(Torx 1,8x12).
6. Lift off the lower case shell (1050).
7. Lift composite of MMI-board (1020) and RF-and controle module (1010) out
of the upper case shell (1040).
Only for level-2 repairs:
a) Remove ringer gasket (1080) from the MMI board (1020).
b) Remove RF plug from RF- and control module (1010).
c) Take off the MMI board (1020).
d) Take frame (1060) off the RF- and control module (1010).
e) Remove interconnector (1090) from the frame (1060).
8. If necessary: Take battery connector out of lower case shell (1050).
9. Remove the dust protection frame (1210) from the upper case shell (1040).
10. Take keypad (1030) out of upper case shell (1040).
11. Remove earphone capsule (1120) and microphone (1110) from upper case shell.

4.3 Assembling the S6

ESD regulations have to be followed!
V1.3
Private Communication Systems
7
Mobile Phones
PN MP ST
D. Schnoor
10/97