Getting Started; Installing Emoty On Your Telephone; Disassembling Your Telephone; Install Emoty - Siemens CX70 Emoty User Handbook Manual

Getting started

Installing Emoty on your
telephone
If you have a CX70 Emoty, you only
need to insert the SIM card and fit
the Emoty cover before you can "get
going" (p. 10)!
If you have a separate CX70 Emoty
cover, you need to install the Emoty
application and Emoty animations
on your telephone as well, p. 9.
Before fitting the Emoty cover, switch
your telephone off!

Disassembling your telephone

• If necessary, disassemble your tel-
ephone according to the instruc-
tions in the user handbook of your
telephone.
• Remove the old keypad.
Getting started

Install Emoty

Insert the telephone in the lower shell
1
Hold the telephone with the display
facing upwards.
Insert the lower edge of the telephone
at an angle into the lower shell of the
Emoty cover.
Make sure that the telephone is inserted
under the contact pin of the Emoty!
2
Carefully press on the upper shell of
the telephone until it clicks into place
in the lower shell.
Place the new keypad on the tele-
phone. Make sure that it is seated cor-
rectly.
Emoty keyboard
The new keyboard lets you select Emotions
by pressing the symbols (p. 11). If the
Emoty application is switched off, the key-
board functions like your normal telephone
keyboard.
7