For More Information On Multipathing Software; Storing Fru Information; To Store Information In Available Fru Proms - Siemens T1000 Administration Manual

Solaris IP Network Multipathing software provides multipathing and
■
load-balancing capabilities for IP network interfaces.
VERITAS Volume Manager (VVM) software includes a feature called Dynamic
■
Multipathing (DMP), which provides disk multipathing as well as disk load
balancing to optimize I/O throughput.
Sun StorEdge™ Traffic Manager is an architecture fully integrated within the
■
Solaris OS (beginning with the Solaris 8 release) that enables I/O devices to be
accessed through multiple host controller interfaces from a single instance of the
I/O device.

For More Information on Multipathing Software

For instructions on how to configure and administer Solaris IP Network
Multipathing, consult the IP Network Multipathing Administration Guide provided
with your specific Solaris release.
For information about VVM and its DMP feature, refer to the documentation
provided with the VERITAS Volume Manager software.
For information about Sun StorEdge Traffic Manager, refer to your Solaris OS
documentation.

Storing FRU Information

The setfru command enables you to store information on FRU PROMs. For
example, you might store information identifying the server in which the FRUs have
been installed.
▼

To Store Information in Available FRU PROMs

●
At the sc> prompt type:
setfru –c data
38 SPARC Enterprise T1000 Server Administration Guide • April 2007