Edit Code - Sirius Satellite Radio ST2C STARMATE REPLAY User And Installation Manual

Code" prompt will be displayed. Enter your
four digit code and press the select button to
continue.
Enter Code
# ____ # ____
4. When the correct code has been entered, a
listing of channels will be displayed. Use the
channel up and down buttons to navigate to the
channel you wish to lock or unlock, and press
the select button. A previously locked channel
will have the word "Lock" displayed to the right
of the channel name.
Lock/Unlock
001 Channel Name 001 Channel Name
002 Channel Name
003 Channel Name Lock 003 Channel Name Lock
004 Channel Name 004 Channel Name
5. To lock or unlock a channels, use the channel
up and down buttons to highlight a channel, and
press the select button.
If you are locking a channel, the word "Lock" will
46
be displayed to the right of the channel name. If
you are unlocking a channel, the word "Lock"
will be removed from the right of the channel
name.
To exit the Parental Control menu, press the
MENU button.

Edit Code

This setting allows you to change a previously
selected Parental Control code.
The first time the Edit Code setting is accessed
you will be prompted to enter a four digit code.
This code can be any four digit number from 0000
to 9999.
Enter Code
# ____ # ____
If you should exit this prompt without entering a
code, you will be prompted to set a code the next
time you enter the Edit Code option.
To change the Parental Control code, do the
following:
ST2C Starmate Replay User and Installation Guide