Test Mode - Sony MDS-M100 Service Manual

1. PRECAUTIONS FOR USE OF TEST MODE
• As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc
is stopped before setting and removing it.
[ EJECT]
§
Even if the button is pressed while the disc is rotating during continuous playback, continuous recording, etc., the disc will
not stop rotating.
Therefore, it will be ejected while rotating.
[ EJECT]
Be sure to press the §
1-1. Recording laser emission mode and operating buttons
• Continuous recording mode (CREC MODE)
• Laser power check mode (LDPWR CHECK)
• Laser power adjustment mode (LDPWR ADJUST)
• Traverse (MO) check (EF MO CHECK)
• Traverse (MO) adjustment (EF MO ADJUST)
[ REC]
r
• When pressing the
2. SETTING THE TEST MODE
The following are two methods of entering the test mode.
Procedure 1: While pressing the =
= + knob and p button.
AMS
When the test mode is set, "[Check]" will be displayed. Turn the =
groups; ···N n [Check] N n [Adjust] N n [Service] N n [Develop] N n ···.
Procedure 2: While pressing the =
When the test mode is set, "TEMP CHECK" will be displayed. By setting the test mode using this method, only the
"Check" group of method 1 can be executed.
3. EXITING THE TEST MODE
[REPEAT]
Press the button. The disc is ejected when loaded, and "Standby" display blinks, and the STANDBY state is set.
4. BASIC OPERATIONS OF THE TEST MODE
All operations are performed using the =
The functions of these buttons are as follows.
Function name
AMS
= + knob Changes parameters and modes
YES button Proceeds onto the next step. Finalizes input.
MENU/NO button Returns to previous step. Stops operations.
SECTION 4

TEST MODE

[MENU/NO]
button after pressing the
button.
+ knob and p button, connect the power plug to an outlet, and release the
AMS
+ knob, connect the power plug to the outlet and release the =
AMS
+ knob,
AMS
Function
button and the rotation of disc is stopped.
+ knob switches between the following four
AMS
[YES] [MENU/NO]
button, and
– 16 –
+ knob.
AMS
button.