Changing The Final Drive Oil - Yamaha BT1100 2002 Service Manual

3
CHECKING THE FINAL DRIVE OIL LEVEL/

CHANGING THE FINAL DRIVE OIL

1
2
3-27
Recommended final drive oil
SAE 80 hypoid gear oil
graded "GL-4", "GL-5" or "GL-6"
or
multi-purpose SAE 80W90
hypoid gear oil
4. Install:
• final drive housing oil filler bolt
EAS00145
CHANGING THE FINAL DRIVE OIL
1. Place a container under the final drive hous-
ing.
2. Remove:
• final drive housing oil filler bolt 1
• final drive housing oil drain bolt 2
Completely drain the final drive housing of
its oil.
3. Check:
• final drive housing oil drain bolt gasket
Damage Replace.
4. Install:
• final drive housing oil drain bolt
5. Fill:
• final drive housing (to the bottom brim 3 of
the filler hole) (with the specified amount of
the recommended final drive oil)
Quantity
0.2 L
6. Install:
• final drive housing oil filler bolt
Refer to "CHECKING THE FINAL DRIVE OIL
LEVEL".
INSP
ADJ
23 Nm (2.3 m•kg)
23 Nm (2.3 m•kg)
23 Nm (2.3 m•kg)