Adjusting The Rear Wheel Static Balance - Yamaha BT1100 2002 Service Manual

REAR WHEEL AND BRAKE DISC
a. Install the rear wheel in the swingarm
b. Install the spacers, brake caliper bracket and
c. Tighten the rear wheel axle nut with specified
3
1
2
d. Tighten the rear axle pinch bolt 2 with speci-
e. Install the rear brake caliper and tighten the
f.
g. Tighten the bolts 3 of rear brake caliper ten-
EAS00575
ADJUSTING THE REAR WHEEL STATIC BAL-
ANCE
NOTE:
• After replacing the tire, wheel or both, the rear
• Adjust the rear wheel static balance with the
1. Adjust:
6-13
rear wheel axle 1.
torque.
Rear wheel axle
110 Nm (11.0 m•kg)
fied torque.
Wheel axle pinch bolt
22 Nm (2.2 m•kg)
bolts with specified torque.
Rear brake caliper bolt
35 Nm (3.5 m•kg)
Push down the brake caliper tension bar.
sion bar with specified torque.
Rear brake caliper tension bar bolt
25 Nm (2.5 m•kg)
wheel static balance should be adjusted.
brake disc and rear wheel drive hub installed.
• rear wheel static balance
Refer to "FRONT WHEEL AND BRAKE
DISCS".
CHAS