To Set The Position Where The Indoor Unit Is Installed - Daikin FTXZ25NV1B Operation Manual

Note on setting the clock
• If the indoor unit's internal clock is not set to the correct time, the ON/OFF TIMER, COMFORT SLEEP TIMER and QUICK HEATING
TIMER will not operate punctually.
To set the clock
1.
Press .
2.
Press to set the clock to the current
time.
• Each time you press
you press and hold the button, the time changes by
10 minutes.
3.
Press .
• After " CLOCK Set " appears, the normal screen is
displayed again.
< To set the clock after replacing the batteries >
When the clock is set, the set time is saved in the indoor unit. After replacing the batteries,
direct the remote controller toward the indoor unit and press
automatically.) If "12:00" keeps on blinking, follow steps 1 to 3 above.

To set the position where the indoor unit is installed

Set "INSTALLED POSITION" in the menu settings.
• To adjust the airflow properly, set the "INSTALLED POSITION".
To set the brightness of the indoor unit lamps
Press .
BRIGHTNESS High
(default)
, the time changes by 1 minute. If
BRIGHTNESS Low
. (The time will be set
 Page 31, 33
BRIGHTNESS Off
10