Vx 680 Power Save Mode; Transactions Note - VeriFone VX 680 User Manual

VX 680 POWER SAVE MODE

The VX 680 has several levels of Power Save mode.
1) After approximately 45 seconds of not being used, the
VX 680 will go into power save mode and only a clock will
be displayed. Press any key to wake the terminal up and
display the menu again.
2) After an additional 90 seconds of inactivity the screen
will go dark (without the clock) and the Battery light will
flash slowly. Press the green Power On key to wake the
terminal up.
3) After an additional 5 minutes of inactivity the terminal
will power Off. Press and hold the green Power On for
approximately key 6 seconds until the screen brightens and
displays "...Loading..." to turn it back on. (This mode does
not appear while plugged into a power supply.)

TRANSACTIONS NOTE

The following transactions are shown as basic transactions.
Some processors may also select options for additional
fields such as security code, zip code, invoice number and
others. Please see the Additional Fields Section for more
information.
VX 680 USER GUIDE 4 2011