GE JBP19 Use And Care & Installation Manual page 11

OVEN CONTROL, CLOCK AND TIMER
Not all features are on all models
The oven controls selwe several purposes. Follow the directions for the
controls that apply to your model.
Automatic Clock
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a Timed Baking or Self-Cleaning cycle.
To Set the Clock
~
1. Press the CLOCK pad.
2. Press the HOUR and MIN. pads to set
the time of day.
Timer
The timer is a minute timer only.
The timer does not control oven
operations. The maximmn setting
on the timer is 11 hours and 59
minutes.
To Set the Timer
~
1. Press the TIMER
ON/OFF pad.
2. Press the HOUR and MIN. pads
until the amount of time you
want shows in the display. The
timer will start automatically
within a few seconds of
releasing the pad.
To Reset the Timer
If the display is still showing the
time remaining, you may change it
by pressing the HOUR and MIN.
pads until the time you want
appears in the display.
If the remaining time is not in the
display, recall the remaining time
by pressing the TIMER ON/OFF
pad and then pressing the HOUR
and MINI. pads until the new time
you want shows on the display.
To Cancel the Timer
To cancel the timer, the remaining time must be in
the display. To recall the time remaining, press the
TIMER ON/OFF pad once. To cancel the timer press
the TIMER ON/OFF pad again.
End of Cycle Tones (on
some models)
The end of cycle tone can be cleared by pressing the
TIMER ON/OFF pad or, on some models, by pressing
the COOK TIME ON/OFF pad depending on which
fianction you are using.
Power Outage
On some models, after a power outage the oven will
automatically resume its setting once the power is
restored.
For models with a CLOCK pad, when the power is
restored the display will flash the trine of day until a
pad is pressed or the knob is turned. Reset the clock to
the correct time of day.
If the oven was in operation when the power outage
occurred, the Oven Temperatm'e knob must be turned
back to OFF. Then reset the knob to the way it was
before the power outage.
If your model has a COOK TIME ON/OFF pad
and your oven was set for timed baking or roasting
when the power outage occurred, the clock and all
programmed functions must be reset. To reset them,
first turn the Oven Temperature knob back to OFF,
reset the c!ock, functions and knob back to the way
they were before the power outage.
Oven Temperature Knob
The oven temperature
OVEN ON Q
OFF Q
PREHEATED
knob maintains the
BROIL
temperature you set
from WARM (170°F.) .....
-
to BROIL (550°F.).
It also has an OFF
and an AUTO SELF
CLEAN se~g.
Appearance may vau.
The PREHEATED light glows when the oven
reaches your selected temperature.
The OVEN ON light will glow any time the Oven
Temperature knob is not in the OFF position and is
set on a temperature or a function.
11