Part Identification Chart - Weslo WLEX61211.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has
been preattached.
M8 Curved
M8 Washer M8 Split
1/2" Washer
(38)–2 Washer (14)–2
Washer (8)–4
(44)–2
M6 Locknut M8 Locknut (9)–8
Right Pedal Nut Left Pedal Nut
(56)–4
(48)–1
(47)–1
M5 x 15mm M6 x 10mm M6 x 33mm Hex M8 x 40mm
M5 x 6mm
Machine Machine Bolt (32)–4 Carriage Bolt (18)–2
Self-tapping
Screw (58)–1 Screw (25)–4
Screw (15)–7
5