Disassembly - Sony MZ-E800 Service Manual

• This set can be disassemble in the order shown below.
Set
Panel Assy, Rear
Front Panel Section
Shutter Section
MD Mechanism Deck (MT-MZE800-170)
Main Board
Note: Follow the disassembly procedure in the numerical order given.
PANEL ASSY, REAR
Note: In removing or mounting the rear panel, insert a disc into the
mechanism deck so as to keep the holder Assy in down position.
3 lid, battery case
holder assy
LCD flexible board
SECTION 3

DISASSEMBLY

Display Panel, Liquid Crystal (LCD901)
OP Service Assy "Motor, DC SSM17A/C-NP (Spindle) (M901)",
(LCX-2E) "Motor, DC (Sled) (M902)"
2 claw
1 Open the battery case lid.
4 two MI screws (1.4)
– 7 –
Holder Assy
4 two MI screws (1.4)
5 panel assy, rear
Note: In mounting the rear panel assy,
take care not to get entangled
with the LCD flexible board.