Rear Axle; Appearance Care And Protection From Corrosion - Dodge 2014 SRT Viper Owner's Manual

Hide thumbs Also See for 2014 SRT Viper:
Table of Contents

Advertisement

manufacturer's recommended brake fluid. Refer to "Flu-
ids, Lubricants, and Genuine Parts" in "Maintaining Your
Vehicle" for further information.

Rear Axle

Axle Lubricant Level Check
Check the exterior of the axle for evidence of gear oil
leakage every 12 months or 6,000 miles (10 000 km). This
check should be made with the vehicle level and on the
ground or raised on an axle and wheel type hoist. The
axle lubricant level should be between the bottom of the
filler plug and a point approximately 3/8 inch (9.5 mm)
below the filler plug. If adding axle lubricant, use only
the manufacturer's recommended axle lubricant. Refer to
"Fluids, Lubricants, and Genuine Parts" in "Maintaining
Your Vehicle" for further information.
MAINTAINING YOUR VEHICLE 313
CAUTION!
Using axle fluid other than the manufactured recom-
mended fluid may cause a shudder/noise issue. refer
to "Fluids Lubes and Genuine Parts" in " Maintain-
ing Your Vehicle" for further information.
Change Axle Lubricant
Refer to "Maintenance Schedule" for the proper mainte-
nance intervals. Change the lubricant immediately if
contaminated with water. See your authorized dealer for
service.

Appearance Care And Protection From Corrosion

Protection Of Body And Paint From Corrosion
Vehicle body care requirements vary according to geo-
graphic locations and usage. Chemicals that make roads
passable in snow and ice, and chemicals that are sprayed
on trees and road surfaces during other seasons, are
7

Advertisement

Table of Contents
loading

Table of Contents