To Unlatch The Liftgate; Using The Panic Alarm; Programming Additional Transmitters; Transmitter Battery Replacement - Dodge 2014 SRT Viper Owner's Manual

Hide thumbs Also See for 2014 SRT Viper:
Table of Contents

Advertisement

refer to "Uconnect® Access Settings" in "Understanding
Your Instrument Panel" for further information.

To Unlatch The Liftgate

Press the LIFTGATE button on the RKE transmitter two
times within five seconds to unlatch the liftgate.

Using The Panic Alarm

To turn the Panic Alarm feature on or off, press and hold
the PANIC button on the RKE transmitter for at least one
second and release. When the Panic Alarm is on, the
headlights will turn on, the park lights will flash, the
horn will pulse on and off, and the interior lights will
turn on.
The Panic Alarm will stay on for three minutes unless
you turn it off by either pressing the PANIC button a
second time or drive the vehicle at a speed of 15 mph
(24 km/h) or greater.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
NOTE: The interior lights will turn off if you cycle the
ignition switch to the ACC or ON/RUN position while
the Panic Alarm is activated. However, the exterior lights
and horn will remain on.

Programming Additional Transmitters

Programming Key Fobs or RKE transmitters may be
performed at an authorized dealer.

Transmitter Battery Replacement

The recommended replacement battery is one CR2032
battery.
NOTE:
• Perchlorate Material — special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
• Do not touch the battery terminals that are on the back
housing or the printed circuit board.
2

Advertisement

Table of Contents
loading

Table of Contents