Using The Phone; Switch The Handset On Or Off; Make, Answer Or End A Home Line Call; Make, Answer Or End A Mobile Line Call - VTech DDA200BT User Manual

Using the phone

Switch the handset on or off

To switch the handset off:
1. Press and hold <END CALL>.
2. Press <MENU/SELECT> to confirm.
To switch the handset on
1. Press and hold <END CALL> again.

Make, answer or end a home line call

To make a home line call
Press CALL/FLASH or SPEAKER then enter the telephone number. Or enter the telephone number then press CALL/FLASH or

SPEAKER.
To answer a home line call:
When you receive a home line call, the phone rings. The display will show the caller's number if available or the caller's name if
it matches an entry in the phonebook.
Press CALL/FLASH or SPEAKER to answer an incoming home line call.

To end a home line call
Press END CALL/CLEAR or put the handset in the DDA200BT base or charger.


Make, answer or end a mobile line call

You can connect a maximum of two Bluetooth enabled mobile phones to the DDA200BT, but only one mobile phone can be
used on a mobile line call at a time. All DDA200BT handsets can be used to make or answer calls on the mobile phone line.
To make a mobile line call:
Enter the telephone number. Then press MOBILE to make a mobile line call if you have only one mobile phone connected to

the DDA200BT. If you have two mobile phones connected to the DDA200BT, the telephone system prompts you to select a
mobile phone before you make a mobile line call.
Note: When dialling out via the mobile line you need to enter the complete number, including the area code (even for local
calls).
To answer a mobile line call:
Press MOBILE.

Note: You can also use your mobile phone to answer the call. If you answer with your mobile phone, it disconnects from the
DDA200BT.
To end a mobile line call:
Press END CALL/CLEAR or put the handset in the DDA200BT base or charger.


Answer a mobile line call while on a home line call

If you are on a home line call and you receive an incoming mobile line call, you hear a beep and
handset you are using. The DDA200BT base and all other handsets ring.
To answer the incoming mobile line call
Press MOBILE on the handset. The home line call is automatically placed on hold and all other handsets display Home line

call on hold and Mobile line in use alternately.
To end the mobile line call
Press END CALL/CLEAR on the handset. The home line is still on hold. All handsets display Home call on hold.

To resume the home line call on hold
Press CALL/FLASH on the handset.


Answer a home line call while on a mobile line call

If you are on a mobile line call and you receive an incoming home line call, you hear a beep and displays on the handset you are
using. The DDA200BT base and all other handsets ring.
Press CALL/FLASH on the handset. The mobile line call is automatically placed on hold and all other handsets display Mobile

call on hold and Home line in use alternately.
or displays on the
19