4.20 Heat sink/CPU
Installing a CPU
To install a CPU perform the following procedure. (See Figure 4-33.)
1. Make sure the cam is in the open position.
2. Set the CPU in place on the CPU socket.
Caution: When setting the CPU on the socket, make sure that the triangle mark on
the CPU comes to the right position. (Refer to the figure below.)
3. Turn the cam clockwise 180 degrees with a flat-blade screwdriver to fix the CPU.
PORTEGE A200 Maintenance Manual (960-499)
Mark
Figure 4-33 Installing a CPU
4 Replacement Procedures
Cam
4-43