Toshiba PORTEGE A200 series Maintenance Manual page 171

3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program
Table 3-6 Error code for Bluetooth test (BD_ADDR) (2/2)
Error code
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2a
0x2b
0x2c
0x2d
0x2e
0x2f
** See the Specification of the Bluetooth System in detail.
Subtest03 Communication test (DUT mode)
Subtest T Communication test (TEST mode)
This subtest checks the Bluetooth communication functions. Set the responder
machine to DUT mode and tester machine to TEST mode.
Insert a floppy disk containing the test program into the responder machine and turn
on the power. The Bluetooth test menu will appear.
Press 3 to select the test and press Enter of the responder machine. The following
message will appear:
When the test begins, the machine displays BD_ADDR of the DUT. The progress
bar appears when the preparation is completed. The following message is
displayed.
----------------------------------------------------------------------------
-
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
Co.
----------------------------------------------------------------------------
-
+----------------------+
| DUT
+----------------------+
PORTEGE A200 Maintenance Manual (960-499)
Unsupported LMP Parameter Value.
Role Change Not Allowed.
LMP Response Timeout.
LMP Error Transaction Collision.
LMP PDU Not Allowed.
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
| BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
3 Tests and Diagnostics
Meaning
Copyright (C) by TOSHIBA
3-73