Toshiba PORTEGE A200 series Maintenance Manual page 239

4 Replacement Procedures
Installing a cover assembly
To install a cover assembly, perform the following procedure. (See Figure 4-21 to 4-24.)
1. Connect the LED cable to the connector PJ9500 on the system board.
2. Mount the cover assembly on the base assembly while engaging the latches.
3. Fix the cover assembly with the following screws .
?
?
?
?
?
4. Connect the LCD cable to the connectors PJ5600 on the system board.
4-34
M2? 3C S-THIN HEAD screw
(in the battery slot)
M2.5? 12B FLAT HEAD screw
M2.5? 8B BIND screw
M2.5? 4B FLAT HEAD screw
M2.5? 12B FLAT HEAD screw
(When the optical drive is not removed.)
4.15 Cover assembly
? 1
? 5 (?)
? 8 (?)
? 2 (?)
? 1 (?')
PORTEGE A200 Maintenance Manual (960-499)