Table of Contents
Advertisement
The screwsusedin this step:
1.
4pcsofM6x13screws:
Wheels and Leg Extendersto Cart
[]
Turn assembly upsidedown. Align the bottomshelf side holeswith leg holes.
[]
Attach sides of bottom shelf to four legs with (4) M6x13 screws, M6 lock washers and M6flat washers.
Fully tighten all shelf screws,top and bottom.
[]
Removehitch pin, nut and washer from axle. Insert axle rod through a wheel, through both right leg
axle holes, and through other wheel.
[]
Attach with (1) Axle washer, nut and hitch pin. Assemblewheels with "cone"side against legs.
[]
Hammerleg extendersonto left legs.
/
2.
4pcs of M6Iockwashers:
3.
4pcsof M6flat washers:
Leg Extender Rear
\
Leg Extender Front
Axle Rod
/
Hitch Pin
Nut
Alxe Washer
640-01303702-3-58,15
Advertisement
Table of Contents
