Kenmore 146.16142210 Use & Care Manual
Kenmore 146.16142210 Use & Care Manual

Kenmore 146.16142210 Use & Care Manual

Liquid propane gas grill
Hide thumbs Also See for 146.16142210:

Advertisement

Use & Care Guide
Manual de Uso y Cuidado
English / Español
Model/Modelo: 146.16142210
Item / Artículo: 640-03982839-7
Kenmore
®
Liquid Propane Gas Grill
Parilla a gas de propane liquido
P/N 40900319
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
www.kmart.com

Advertisement

Table of Contents
loading

Summary of Contents for Kenmore 146.16142210

  • Page 1 Use & Care Guide Manual de Uso y Cuidado English / Español Model/Modelo: 146.16142210 Item / Artículo: 640-03982839-7 Kenmore ® Liquid Propane Gas Grill Parilla a gas de propane liquido P/N 40900319 Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A.
  • Page 2: For Your Safety

    Installation Safety Precautions DANGER • Please read this User’s Manual in its entirety before using the grill. • Failure to follow the provided instruction can result in If you smell gas: seriously bodily injury and/or property damage. • Some parts of this grill may have sharp edges. Please wear suitable protective gloves.
  • Page 3: Table Of Contents

    Repair Protection Agreements of normal use, accident or improper maintenance. ® Congratulations on making a smart purchase. Your new Kenmore product is designed and manufactured for years of dependable All warranty coverage is void if this grill is ever used for operation.
  • Page 4: Use And Care

    LP Cylinder USE AND CARE • The LP cylinder used with your grill must meet the following requirements: DANGER • Use LP cylinders only with these required measurements: 12" (30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) Capacity maximum.
  • Page 5 LP Tank Exchange Connecting Regulator To The LP Tank • Many retailers that sell grills offer you the option of replacing 1. LP tank must be properly secured onto grill. (Refer to your empty LP tank through an exchange service. Use only those assembly section.) reputable exchange companies that inspect, precision fill, test 2.
  • Page 6 Leak Testing Valves, Hose and Regulator 1.Turn all grill control knobs to OFF. 2.Be sure regulator is tightly connected to LP tank. 3.Completely open LP tank valve by turning OPD hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately.
  • Page 7 Safety Tips WARNING ▲ Before opening LP cylinder valve, check the coupling nut for tightness. ▲ When grill is not in use, turn off all control knobs and LP cylinder For Safe Use of Your Grill and to Avoid Serious valve.
  • Page 8 Burner Flame Check WARNING • Remove cooking grates and heat diffusers. Light burners, turn knobs from HI to LO. You should see a smaller flame in LO position than seen on HI. Perform burner flame check Turn controls and gas source or tank OFF when not on sideburner, also.
  • Page 9: Spider Alert

    Cleaning the Burner Assembly WARNING CAUTION Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill. 1. Turn gas off at control knobs and LP cylinder. SPIDER ALERT! SPIDER ALERT! SPIDER ALERT! 2.
  • Page 10: Indirect Cooking

    Indirect Cooking Food Safety Poultry and large cuts of meat cook slowly to perfection on the grill Food safety is a very important part of enjoying the outdoor by indirect heat. Place food over unlit burner(s); the heat from lit cooking experience.
  • Page 11: Parts List

    Part Part Description Description Number Number Side Burner Lid 40200044 Cotter Pin 110050 Rotate Rod, Side Burner Lid 40800118 Cart Support Angle Bar 40900060 Side Burner Grid 40800119 Tank Holder 40800130 Side Burner 40800121 Left Door 40900062 Igniter Wire, Sideburner 40800120 Left Side Panel 40900052...
  • Page 12: Parts Diagram

    DIAGRAM 12 • 16142-40900319...
  • Page 13: Before Assembly

    BEFORE ASSEMBLY READ AND FOLLOW THE INSTRUCTIONS BELOW TO CORRECTLY UNPACK GRILL PARTS FROM SHIPPING BOX. Step 1: Open shipping box by slicing down its edges with a box cutter, take out hardware pack, manual, bottom shelf, two doors. Next remove the two side panels, warming rack, door bracket, back rail and back panel.
  • Page 14: Before Assembly

    BEFORE ASSEMBLY Step 2: Remove the left and right Styrofoam from Grill Head. Open grill lid and take out the boxes, packaged grates and grease tray. Remove all packing material, and take all parts out of boxes. • 16142-40900319...
  • Page 15: Assembly

    BEFORE ASSEMBLY 16142-40900319 • 15...
  • Page 16: Assembly

    ASSEMBLY CAREFULLY READ AND PERFORM ALL ASSEMBLY INSTRUCTIONS ON THE FOLLOWING PAGES. Tools Required: Adjustable wrench (not provided) Screwdriver (not provided) 7/16” Combination wrench (not provided) The following hardware is provided in blister pack for convenient use. M4X10 screw M4X10 countersunk head screw AAA Battery Qty: 28 pcs Qty: 8 pcs...
  • Page 17 Bottom Shelf Turn bottom shelf upside down. Attach the casters to bottom shelf with (16) M6x13 screws. Note: Install each caster into the correct position as shown in the figure below. The standard caster will only install in one direction. □...
  • Page 18 Cart □ To attach side panels, align side panel leg holes with leg holes on each side of bottom shelf. Left side panel has match holder attachment. □ Attach left and right side panels to sides of bottom shelf with (4) M6x13 screws. (A) □...
  • Page 19 Front Doors □ Remove the (4) M5x15 screws pre-assembled to the door handle ends, and use them to attach handles to doors. □ Place the door in front of cart, align door hinge holes with holes on side of door, and attach the door to the door hinges with (4) M4x10 countersunk head screws.
  • Page 20 Grill Head to Cart □ This step requires two people to lift and position grill head onto cart. □ Remove the tie wraps securing regulator hose to underside of grill head. Pull hose and igniter wires out to side of grill head. □...
  • Page 21 Left Side Shelf □ Attach fascia to left side shelf with (2) M5x10 screws and M5 flat washers. (A) □ Hang shelf onto brackets on left side of firebox. □ Attach shelf to firebox as follows: - From inside to outside of firebox with (2) M6x13 screws and M6 compression washers. (B) - From outside to inside of firebox with (2) M6x13 screws.
  • Page 22 Right Side Shelf □ Remove sideburner grate from sideburner before assembling and attaching the right side shelf. □ Attach fascia to right side shelf with (2) M5x10 screws and M5 flat washers.(A) □ Hang right side shelf onto the brackets on right side of firebox. □...
  • Page 23 Sideburner □ Loosen side burner in side shelf. (B ). To loosen, unscrew and remove two front screws holding sideburner in place. (A). Note: Do not loosen electrode screw. □ Remove the 2 pre-installed screws from the valve stem and set them aside. (C) □...
  • Page 24 Heat Diffusers, Cooking Grates and Warming Rack □ Place heat diffusers over burners. Diffusers will fit in firebox in either direction. Fit tabs in firebox front through slots in diffuser tips. Fit diffuser tips over tabs in firebox rear. □ Place cooking grates onto grate rests at front and rear of firebox . □...
  • Page 25 Grease Tray, Grease Cup and LP tank □ Hang grease cup clip from bottom of grease tray. Slide grease tray into bottom of firebox from back. Make sure the grease drainage hole is on the right side, as seen from the back of the grill.
  • Page 26: Troubleshooting

    EMERGENCIES: If a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department. Gas leaking from •Turn off gas at LP cylinder or at source on natural gas systems. • Damaged hose. cracked/cut/burned If the hose is cracked or cut but not burned, simply replace hose.
  • Page 27 Troubleshooting (continued) Problem Possible Cause Prevention/Solution Burner(s) will not light ELECTRONIC IGNITION: • See Section I of Electronic Ignition System. using igniter. • No spark, no ignition noise. (See Electronic • See Section II of Electronic Ignition System. Ignition • No spark, some ignition noise. Troubleshooting also) •...
  • Page 28: Troubleshooting

    Troubleshooting - Electronic Ignition Problem Possible Cause Preventio • Battery not installed SECTION I • Check battery orientation. • Install battery (make sure that “+” and “-” properly. No sparks appear at connectors are oriented correctly, with “+” end any electrodes when up and “-”...
  • Page 29 Get it fixed, at your home or ours! Your Home For troubleshooting, product manuals and expert advice: www.managemylife.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.

Table of Contents