Star Micronics LC-240C User Manual page 57

Problem
Line spacing is incorrect.
Lines print over each other.
Incorrect number of lines are
printed on the page.
Text and graphics are
malformed.
Print quality is poor.
Possible Cause
Jamming paper.
The line spacing or leading
selected your application
program is wrong.
Auto line feed with carriage
return is enabled by the User
Setup Utility.
Auto line feed with carriage
return is disabled by the
User Setup Utility.
Jamming paper.
Auto line feed with carriage
return is enabled by the User
Setup Utility.
The line spacing or leading
selected by your application
program is wrong.
Vertical dot adjustment is not
set properly.
The printer is not set up
correctly for the thickness of
paper being used.
Troubleshooting guide
Recommended
Action
Set up the printer for the
paper thickness you are
using. See "Adjusting for
paper thickness" on page 40.
Choose a different line
spacing or leading setting
from your application.
Use the User Setup Utility to
disable auto line feed with
carriage return. See "Auto
LF with CR" on page 24.
Use the User Setup Utility to
enable auto line feed with
carriage return. See "Auto
LF with CR" on page 24.
Set up the printer for the
paper thickness you are
using. See "Adjusting for
paper thickness" on page 40.
Use the User Setup Utility to
disable auto line feed with
carriage return. See "Auto
LF with CR" on page 24.
Choose a different line
spacing or leading setting
from your application.
Use the User Setup Utility to
set the printer's vertical dot
alignment.
Set up the printer for the
paper thickness you are
using. See "Adjusting for
paper thickness" on page 40.
51