Wheel Bolt 3/8"X3-3/8" Qty; Qty. 8 - Kenmore 141.16223 Owner's Manual

H NOTE: Before attaching the Cart Bottom Shelf to Cart be sure tank hole on the Bottom is
located on the right side.
Install the Cart Bottom Shelf between the Cart Legs. Align the holes on Cart Legs with the
threaded holes at the corners of Cart Bottom Shelf. Attach loosely the 8 screws then tighten
screws.
D
Pattern Head Screw 1/4"x2-3/4"
Qty. 8
Ref. # S135G04332
1. Screw the 2 Casters into the Caster Seats. Turn the threaded Caster Stem by hand, clockwise until
it stops. Tighten securely using the Customized Wrench provided.
2. Install the 2 Wheels to the Cart Legs-Wheel Side, by inserting the wheel bolt through the wheel and
axle hole on the cart leg. Put spring washer and 3/8" nut onto bolt and tighten securely using the
Customized Wrench provided. Do not overtighten or wheel will not turn freely. Snap Wheel Hub Caps
onto wheels.
Wheel Bolt 3/8"x3-3/8"
Qty. 2
Ref. # $211G06352
Spring Washer
Qty. 2
Ref. # $431M08152
Nut 3/8"
Qty. 2
Ref. # $313G06082
Wrench/NO.17 Customized
Qty. 1
Ref. # P05515101L
11