Advertisement
Quick Links
Parts and Accessories
Installation Instructions
Wide screen monitor 16:9 retrofit kit
BMW X5 (E 53)
These installation instructions are only valid for vehicles with board monitor 4:3 and navigation
computer Mark III.
Technical and electrical knowledge required
The installation time is approx. 0.5 hours but this may vary depending on the condition of the
vehicle and the installed equipment in it.
Retrofit / Installation kit No. 65 90 0 136 732
Retrofit kit 65 90 0 136 732
Installation Instructions No. 01 29 0 141 872
Issue date: 08.2001
053 0240 B
Advertisement
Related Manuals for BMW X5 Wide screen monitor 16:9 retrofit kit
Summary of Contents for BMW X5 Wide screen monitor 16:9 retrofit kit
- Page 1 Parts and Accessories Installation Instructions 053 0240 B Wide screen monitor 16:9 retrofit kit BMW X5 (E 53) These installation instructions are only valid for vehicles with board monitor 4:3 and navigation computer Mark III. Technical and electrical knowledge required The installation time is approx.
- Page 2 Contents Section Page Important information for installing the wide screen monitor Preparations and parts list To install the wide screen monitor (vehicles with factory-fitted 4:3 board monitor) To install the wide screen monitor (vehicles with retrofitted 4:3 board monitor) Coding and concluding work US/2 Retrofit kit 65 90 0 136 732 Installation Instructions No.
- Page 3 Important information for installing the wide screen monitor Only for use in the BMW dealer organisation. The wide screen monitor may only be installed by a specialist workshop that has the required special tools and manuals (servicing, repair, diagnostics, etc.).
- Page 4 Preparations and parts list Preparations TIS instruction No. Print out error memory Disconnect the battery 12 00 ... Remove the décor strip next to the steering column 51 16 221 Remove the décor strip above the glove compartment 51 16 221 Remove the centre fresh air grille 64 22 161 Remove the 4:3 monitor (no longer required)
- Page 5 To install the wide screen monitor (vehicles with factory-fitted 4:3 board monitor) Carefully remove the reinforcements (10) shaded grey on the board monitor module holder (11) on the left using an oscillating saw. 053 0242 B Carefully remove the reinforcements (10) shaded grey on the board monitor module holder (11) on the right using an oscillating saw.
- Page 6 To install the wide screen monitor (vehicles with factory-fitted 4:3 board monitor) Connect the blue 12-pin connector (10) and the white 12-pin connector (11) to the 16:9 wide screen monitor (1). Then carefully slide the 16:9 wide screen monitor (1) into the board monitor module bracket (12). 053 0246 B Secure the 16:9 wide screen monitor (1) to the left wide screen monitor bracket (3) and the right wide...
- Page 7 To install the wide screen monitor (vehicles with retrofitted 4:3 board monitor) Remove the bottom board monitor holder (10) and spacer plate (11). 053 0248 B Carefully remove the reinforcements (10) shaded grey on the radio module holder (11) on the right using an oscillating saw.
- Page 8 To install the wide screen monitor (vehicles with retrofitted 4:3 board monitor) Secure the left wide screen monitor bracket (3) and the right wide screen monitor bracket (4) to the radio module holder (11) using the Philips screws (10) and the securing screws (11) from the 4:3 board monitor you removed earlier.
- Page 9 Coding and finish work Coding This wide screen monitor does not require coding. Finish work Connect battery Conduct a function test Reassemble the vehicle by following the instructions for its disassembly in reverse order Print out error memory US/9 Retrofit kit 65 90 0 136 732 Installation Instructions No.