When Writing Or Rewriting; Writing Cd/Dvds On Dvd Super Multi Drive - Toshiba tecra s3 User Manual

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.
■
Always copy data from the hard disk drive to the optical media. Do not
use cut-and-paste as the original data will be lost if there is a write error.
■
Do not perform any of the following actions:
■
■
■
■
■
■
■
■
If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.

Writing CD/DVDs on DVD Super Multi drive

You can use the DVD Super Multi drive to write data to either CD-R/RW or
DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are
provided: RecordNow!, and DLA licensed by Sonic Solutions, and
InterVideo's WinDVD Creator Platinum.
■
Refer to the
writable CD/DVD discs.
■
Do not turn off the power of the optical media drive while the computer
is accessing the drive. If you turn off the power, you may lose data.
■
When the power of the optical media drive is off, the disc tray will not
open even if the eject button is pushed. Use the optical media drive
power icon to turn the power of the optical media drive on. Refer to
Chapter 1,
When writing to media using an optical drive, always connect the AC
adaptor to a power plug socket. If data is written while powered by the
batteries, writing may sometimes fail due to low battery power and data
loss may occur.
User's Manual
Change users in the Windows XP operating system.
Operate the computer for any other function, including use of a
mouse or Touch Pad, closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices, including the following:
PC card, SD card, ExpressCard, USB devices, external monitor,
i.LINK devices, optical digital devices.
Open the optical media drive.
Remove the optical media drive from the Ultra Slim Bay.
Writable discs, Chapter 2 for the details about the types of
Special features.
Operating Basics
4-19