Temperature Recorder (Option); Setting Of Mtr-85H - Panasonic MDF-U74V Operating Instructions Manual

TEMPERATURE RECORDER (OPTION)

WARNING
Always disconnect the power supply to the unit prior to attachment of a temperature recorder in
order to prevent electric shock or injury.
A temperature recorder is available for the freezer as an optional component.
temperature recorder is MTR-G85C and MTR-85H. For the attachment, the recorder fixture is necessary.
Contact our sales representative or agent for the installation of a temperature recorder.

Setting of MTR-85H

Recording indicator &
Pen holder
Cover
<Setting of recording paper>
1. Open the cover and let down the pen holder lever. With
this operation, the pen point is apart from the recording
paper.
2. Pull the cartridge out of the mounted position as shown
in Fig. 1 and Fig. 2.
3. Set a new recording paper in place on the rear bottom of
the cartridge. Set the hole on the chart in the cog of the
recording paper driving assembly and feed the recording
paper in the direction of the arrow by driving the cog wheel.
(Fig. 3)
4. Adjust the recording paper properly according to the
marking of date and time.
5. To replace the cartridge to the recorder, insert it
horizontally first with the slot of the cartridge on the
projection on the recorder and then set up the cartridge
vertically.
6. Lift up the pen holder lever and close the cover.
Pen holder lever
Cartridge
32
The type of the
Fig. 1
Fig. 3
Fig. 2
Fig. 3