Snmp Traps - ZyXEL Communications XGS-4728F User Manual

Chapter 40 Access Control

40.3.3 SNMP Traps

The Switch sends traps to an SNMP manager when an event occurs. The following
tables outline the SNMP traps by category.
An OID (Object ID) that begins with "1.3.6.1.4.1.890.1.5.8." is defined in private
MIBs. Otherwise, it is a standard MIB OID.
The OIDs beginning with "1.3.6.1.4.1.890.1.5.8.46" are specific to the XGS-
4728F switch.
Table 124 SNMP System Traps
OPTION OBJECT LABEL
coldstart coldStart
warmstart warmStart
fanspeed FanSpeedEventOn
FanSpeedEventClear
temperatur TemperatureEventOn
e
TemperatureEventClear
voltage VoltageEventOn
VoltageEventClear
reset UncontrolledResetEventOn 1.3.6.1.4.1.890.1.5.8.46.3
ControlledResetEventOn
RebootEvent
340
OBJECT ID
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.4.1.890.1.5.8.46.3
1.2.1
1.3.6.1.4.1.890.1.5.8.46.3
1.2.2
1.3.6.1.4.1.890.1.5.8.46.3
1.2.1
1.3.6.1.4.1.890.1.5.8.46.3
1.2.2
1.3.6.1.4.1.890.1.5.8.46.3
1.2.1
1.3.6.1.4.1.890.1.5.8.46.3
1.2.2
1.2.1
1.3.6.1.4.1.890.1.5.8.46.3
1.2.1
1.3.6.1.4.1.890.1.5.1.1.2
DESCRIPTION
This trap is sent when the
Switch is turned on.
This trap is sent when the
Switch restarts.
This trap is sent when the fan
speed goes above or below the
normal operating range.
This trap is sent when the fan
speed returns to the normal
operating range.
This trap is sent when the
temperature goes above or
below the normal operating
range.
This trap is sent when the
temperature returns to the
normal operating range.
This trap is sent when the
voltage goes above or below the
normal operating range.
This trap is sent when the
voltage returns to the normal
operating range.
This trap is sent when the
Switch automatically resets.
This trap is sent when the
Switch resets by an
administrator through a
management interface.
This trap is sent when the
Switch reboots by an
administrator through a
management interface.
XGS-4728F User's Guide