Telnet Screen - ZyXEL Communications nsa325-v2 User Manual

Click Network > PPPoE in the navigation panel to open the following screen.
Figure 69 Network > PPPoE
The following table describes the labels in this screen.
Table 33 Network > PPPoE
LABEL
Status
Status
IP Address
IP Subnet Mask
Configuration
Enable PPPoE
Connection
Username
Password
Password
(Confirm)
Apply
Reset

9.7 Telnet Screen

Use this screen to enable or disable Telnet access to the NSA. Telnet is available in the NSA310S,
NSA320S, NSA325, and NSA325 v2.
Media Server User's Guide
DESCRIPTION
This field displays the status of PPPoE connection.
This field displays the IP address of your PPPoE connection.
This field displays the IP subnet mask of your PPPoE connection.
Select this option to establish a direct Internet connection for the NSA. You need to enter
the username and password as given by your ISP.
Enter the username exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Enter the password associated with the username above.
Retype the password for confirmation.
Click this to save your changes.
Click this to restore previously saved settings.
Chapter 9 Network
183