Creating An External (Usb) Volume - ZyXEL Communications nsa325-v2 User Manual

Chapter 8 Storage
The following table describes the labels in this screen.
Table 25 Storage > Volume > Scan
LABEL
Auto File Repair
Apply
Cancel

8.5 Creating an External (USB) Volume

Click the Create a New External Volume button (or the Create a USB Volume button
depending on your model) in the Storage screen as shown in
following screen. Use this screen to create a new NSA external disk drive volume.
Note: Creating a volume formats the drive. All data on the disk will be lost.
Figure 62 Storage > Create an External Volume
The following table describes the labels in this screen.
Table 26 Storage > Create an External Volume
LABEL
Volume Name
Available Disk(s)
168
DESCRIPTION
Select this to have the NSA automatically attempt to repair any errored files it detects
during the scan. This may also result in the NSA finding some files and placing them in the
Lost and Found share.
Click this to have the NSA scan the volume.
Click this to close this screen without scanning the volume.
DESCRIPTION
Type a volume name from 1 to 31 characters. The name cannot be the same as another
existing external volume.
Acceptable characters are all alphanumeric characters and " " [spaces], "_" [underscores],
and "." [periods].
The first character must be alphanumeric (A-Z 0-9).
The last character cannot be a space " ".
Select the external (USB) device upon which you want to create the volume.
Figure 57 on page 163 to open the
Media Server User's Guide