Owncloud Setup - ZyXEL Communications nsa325-v2 User Manual

Click Applications > pyLoad to open the following screen.
Figure 128 Applications > pyLoad
The following table describes the labels in this screen.
Table 74 Applications > pyLoad
LABEL
Enable pyLoad
Management Page
Username
Password
Password (Confirm)
Port Number
Apply
Reset

11.10 ownCloud Setup

Use the Package Management screen to install the ownCloud package. Use ownCloud to store,
back up, synchronize, and share files, photos, calendars, and more with computers and mobile
devices. Use the following procedure to install the ownCloud package.
Click Firmware/Packages > Package and select ownCloud. Then click the Install/Upgrade
1
icon.
Media Server User's Guide
DESCRIPTION
Select this to have the NSA manage your downloads. Clear it to turn the
feature off.
This is the IP address and port number of the NSA's pyLoad management
login screen. The pyLoad management login screen uses the NSA's IPv4
address and the port number you configure. Click this link to go to it.
Only the admin account can log into the pyLoad management screen.
You can configure a separate password for using the admin account to access
the NSA's pyLoad management screen.
Type the same password again to make sure you entered it correctly.
Set the pyLoad management page's port number. The range of valid port
numbers is 1024~65536. Include this port number after the IP address when
manually entering the pyLoad management login page's address in your
browser's address bar. For example, 192.168.1.2:7272.
Click this to save your changes.
Click this to restore the screen's last-saved settings.
Chapter 11 Packages
251