Radion Pir C - Bosch ICP-EZM2 System Reference Manual

Easy Series Control Panel
LED condition
Steady blue
Flashing blue
Flashing blue (four-pulse sequence)
Figure 8.3: Walk test
1.
2.
3.
4.
8.10

RADION PIR C

The RFPR-C12 is a high performance curtain PIR motion detector that uses advanced signal
processing to provide outstanding catch performance and unsurpassed false alarm immunity.
The detector contains an integrated RF transmitter. The transmitter sends a battery report
with each transmission, and transmits a supervisory signal to the control panel. Features
include:
–
–
Dimensions
Relative humidity
Temperature (operating)
Power/voltage
Bosch Security Systems, Inc.
Start at the pattern's expected boundary and walk across the pattern moving closer to
the detector (refer to the Walk test figure above).
While the detector is in the Walk Test Mode, turn ON all heating and air conditioning
sources which would normally be active during the protection period. Stay away from the
sensor and outside the coverage pattern and watch for alarms.
The LED flashes at the completion of a 90-sec span of time, indicating that the Walk Test
mode is ending. This occurs when there is no activity in the sensor's coverage pattern
during the 90-sec interval.
When walk testing is completed. the detector returns to normal operation after 90
seconds of inactivity.
12 m x 1.5 m (40 ft x 5 ft) curtain coverage
Flexible Mounting Height
System Reference Guide
Device Specifications and Overview | en
Cause
PIR activation (Walk Test)
Warm-up period after power-up
PIR failure. Replace unit.
111.00 mm x 60.00 mm x 43.00 mm
(4.40 in x 2.40 in x 1.70 in)
0% to 93%, non-condensing
Functional range: -10°C to +49°C (+14°F to +120°F)
EN 50130-5 Class II only: -10ﾟC to 40ﾟC (+14ﾟF to +104ﾟ
F)
One CR123A Lithium batteries, 3 VDC (
Power source type: C
Low battery level: 2,15V
85
)
2014.09 | 01 | F.01U.306.221