Easy Series Control Panel
8.6.4
LEDs
The repeater utilizes an external LED indicator to status the operation of the repeater. Refer to
the table below for LED descriptions.
LED Condition
On (Normal)
Off
Continuous Flash: 1 sec
rate for 5 sec
Continuous Flash: A 3-
pulse signal, followed by
a short delay after the 3
pulse
Continuous Flash: A 2
flash pattern continuous
pulse between On and
Off states with a short
delay after the 2
8.7
RADION glassbreak
The RFGB is a wireless transmitter used for detecting breaking glass. Throughout this
document, the term "glassbreak" refers to glass break.
Features include:
–
–
Dimension
Power/Voltage
Battery replacement
Battery life
Device testing
Accoustic Capabilities Glass types and
Bosch Security Systems, Inc.
Pattern Description
–
–
–
–
rd
–
–
pulse
nd
Monitored battery status
Four sensitivity settings
101.42 mm x 112.90 mm x 35.00 mm
(3.99 in x 4.44 in x 1.38 in)
Battery/CR123A, 3 VDC (
Power source type: C
Low battery level: 2.15V
Duracell DL123A, Lithium, Panasonic CR123A Lithium, or Sanyo
CR123A Lithium. Check your battery yearly to ensure proper
functionality.
Up to 5 years
To ensure proper functionality, the device must be tested at least
once every year.
thickness
System Reference Guide
Device Specifications and Overview | en
Indicates the repeater is functioning normally.
Indicates there is a power failure to the repeater, or that the
receiver is not wired correctly.
Indicates the repeater is being powered up, and conduction
manufacturing test initializations.
Indicates the repeater has experienced a low battery
condition.
Indicates an AC power failure is detected.
A communication failure within internal hardware
components inside the receiver
Type
Plate
)
Thickness
2.4 mm to 6.4 mm
(3/32 in to 1/4 in)
2014.09 | 01 | F.01U.306.221
77