Reassembly And Installation - Suzuki GSF650S Service Manual

CYLINDER RING
Inspect the cylinder ring for wear or damage. If it is worn or dam-
aged, replace it with a new one.
NOTE:
The ring should be installed onto the cylinder with its oil passage
notches 1 facing downward.

REASSEMBLY AND INSTALLATION

Reassemble and install the front fork in the reverse order of
removal and disassembly. Pay attention to the following points:
INNER TUBE
• Install the following parts onto the inner tube.
1 Dust seal
2 Oil seal stopper ring
3 Oil seal
4 Oil seal retainer
$
* When installing the oil seal to inner tube, be careful
not to damage the oil seal lip.
* Apply fork oil to the slide metals and oil seal lip.
* 99000-99044-10G: SUZUKI FORK OIL #10
• Hold the inner tube vertically, clean the metal groove and
install the inner tube slide metal by hand.
$
Do not damage the Teflon coated surface of the inner
tube's slide metal when installing it.
NOTE:
When installing the oil lock piece, insert the tapered end A of
the oil lock piece into the inner tube 5.
Check the installation of the spring 6 when reassemble the oil
lock piece.
CHASSIS 5-17