Arts™ (Auto Range Transpond System) - Vertex Standard VX-820E Series Operating Manual

a
DVanCED
ta s
Can
Press the assigned programmable key to toggle the TA
(Talk Around) scan feature "On" and "Off".
While TA scan is proceeding, the VX-820E will
search both the transmit and receive frequencies (In
the 16-key and 4-key versions, the " " icon will
blink). When a signal is encountered on the receive
frequency, the VX-820E will pause until the signal
disappears (" " icon will appear but not blink). When
a signal is encountered on the transmit frequency, the
VX-820E will check for activity on the receive fre-
quency every few seconds (interval programmed by
your Dealer).
VX-820E S O
EriES pErating
o
pEration
M
anual
arts™
( a
r
uto angE
This system is designed to inform you when you and
another ARTS™-equipped station are within commu-
nication range.
During ARTS™ operation, when the radio receives
the correct ARTS™ signal, a short beep will sound
and the " " (meaning "In Service") notation will
be displayed on the sub-LCD
range for more than two minutes, your radio senses
that no signal has been received; three short beeps
will sound, and " " ("Out of Service") will be dis-
played on the sub-LCD . If you subsequently move
ø
back into range, as soon as the other station transmits,
a short beep will sound and "
again on the sub-LCD .
ø
ø : Except on Non-LCD version.
)
t s
ransponD ystEm
. If you move out of
ø
" will be displayed
25