Symbol VRC 8900 Product Reference Manual page 95

7. Connect the ActiveSync cable between the serial communications port on your
desktop computer, and either the COM2 port or the USB port on the bottom of the
terminal.
Figure 7-2. ActiveSync Cable Connection
8. ActiveSync automatically starts on your desktop computer, and connects to the
terminal.
If no connection occurs, check the communications setting in the Control Panel on
the VRC 8900. On the Communication Properties screen, tap the PC Connection
tab, and check Allow connection with desktop computer when device
is attached.
Also ensure the connection settings are set to Connect Using: Com2 @ 57600.
COM2 Port
USB Port
(ActiveSync)
ActiveSync
7-3