Configuration Guide; Configuring Handytone-488 Wan Ip Through Voice Prompt; Dhcp Mode; Static Ip Mode - Grandstream Networks HandyTone-488 User Manual

HandyTone-488 User Manual
6.1

Configuring HandyTone-488 WAN IP through Voice Prompt

6.1.1

DHCP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-488 to use DHCP.
6.1.2

STATIC IP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-488 to use STATIC IP mode, then
use option 02, 03, 04 to set up HandyTone-488's IP, Subnet Mask, Gateway respectively.
6.2

Configuring HandyTone-488 with Web Browser

HandyTone-488 series ATA has an embedded Web server that will respond to HTTP GET/POST
requests. It also has embedded HTML pages that allow users to configure the HandyTone-488 through
a Web browser such as Microsoft's IE and AOL's Netscape.
6.2.1

Access the Web Configuration Menu

The HandyTone-488 HTML configuration menu can be accessed via LAN or WAN port:
• From the LAN port use the default LAN gateway IP address:
• The WAN port HTML configuration option is disabled by default from factory. To access the
HTML configuration menu from the WAN port, first enable the "WAN side HTTP access"
option by accessing the configuration via LAN port. With the WAN side HTTP access enabled,
then get the WAN IP address of the HandyTone-488 through section 5.1 with menu option 02.
The HandyTone-488's Web Configuration page can be accessed by the following URI via
WAN port:
where the HandyTone-IP-Address is the WAN IP address of the HandyTone-488.
6.2.2

End User Configuration

Once this HTTP request is entered and sent from a Web browser, the HandyTone-488 will respond
with the following login screen:
6

Configuration Guide

http://192.168.2.1
http://HandyTone-IP-Address,
15
Grandstream Networks, Inc.