Advanced User Configuration - Grandstream Networks HandyTone-488 User Manual

HandyTone-488 User Manual
PPPoE Link Up
Detected NAT Type
6.2.3

Advanced User Configuration

To login to the Advanced User Configuration page, please follow the instructions in section 6.2.1 to
get to the following login page. The password is case sensitive and the factory default password for
Advanced User is "admin".
Advanced User configuration includes not only the end user configuration, but also advanced
configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configuration. Following is a snap shot of the advanced configuration page.
Admin Password:
FXS Port :
SIP Server:
Outbound Proxy:
SIP User ID:
Authenticate ID:
Authenticate
Password:
Name:
This field shows whether the PPPoE connection is enabled or not.
This field shows what kind NAT the HandyTone is connected to via its
WAN port. It is based on STUN protocol.
Grandstream Device Configuration
Password
All Rights Reserved Grandstream Networks, Inc. 2005
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
sip.mycompany.com
3123320
3123320
Login
(purposely not displayed for security protection)
(e.g., sip.mycompany.com, or IP address)
(e.g., proxy.myprovider.com, or IP address, if any)
(the user part of an SIP address)
(can be identical to or different from SIP User ID)
(purposely not displayed for security protection)
(optional, e.g., John Doe)
20
Grandstream Networks, Inc.