Care And Maintenance - Suunto M9 Quick Manual

CARE AND MAINTENANCE

Only perform the procedures described in this manual. Never attempt to disassemble or
service your Suunto M9. Protect your Suunto M9 from shocks, extreme heat and prolonged
exposure to direct sunlight. If not in use, your Suunto M9 should be stored in a clean, dry
environment at room temperature.
Suunto M9 can be wiped clean with a lightly moistened (warm water) cloth. If there are
stubborn stains or marks, you can apply mild soap to the area. Do not expose Suunto M9
to strong chemicals such as gasoline, cleaning solvents, acetone, alcohol, insect repellents,
adhesives and paint, as they will damage the unit's seals, case and finish. Keep the PC
interface pins clean with e.g. a toothbrush. Make sure the area around the sensor is kept
free of dirt and sand. Never insert any objects into the sensor opening.
WATER RESISTANCE
Suunto M9 is water resistance-tested up to 10 bar (equivalent of 100 m/330ft depth)
according to ISO 2281 standard (www.iso.ch). However, it is not a diving instrument and
therefore it should not be used to obtain data under water. Do not push the buttons under
water.
Note: Large amounts of water or dirt under the cover of Suunto M9 may disturb the satellite
signal reception.
MEMORY
The data memory in Suunto M9 is non-volatile i.e. data is not lost even if the battery runs out.
9