Creating A User Recovery Cd/Dvd; Creating An Application And Driver Dvd - BenQ Joybook S33 Series User Manual

2. Select a disc type from the Disc Category drop-down menu.
Click OK to proceed.
3. Insert a blank disc when prompted to do so, and then click
Yes.
4. Select your preferred burning speed, and then click OK.
5. The disc burning process starts. A Create Factory Recovery
DVD window appears on the screen and displays the current
status.
Please note that the burning process cannot be interrupted
once started.
6. Continue to create a factory default Application and Driver
DVD. Repeat Step 2 to Step 6 to complete the disc burning
process.
7. After disc burning finishes (the progress bar shows 100%
completion), click the close (cross) button at the top right
corner of the window to proceed.
8. Click Exit and then Yes to leave the application.
Store the discs in a safe place for future use.

Creating a User Recovery CD/DVD

You can use QDataTrove to create recovery discs that include
your own backup system image file.
1. Click the button to select Create User Recovery CD/
DVD.
2. Select a disc type from the Disc Category drop-down menu,
and then select the source of your system image file in Source
Image. Click OK to proceed.
3. Insert a blank disc when prompted to do so, and then click
Yes.
4. Select your preferred burning speed, and then click OK.
5. The disc burning process starts. A Create User Recovery CD/
DVD window appears on the screen and displays the current
status.
Please note that the burning process cannot be interrupted
once started.
6. After disc burning finishes (the progress bar shows 100%
completion), click the close (cross) button at the top right
corner of the window to proceed.
7. Click Exit and then Yes to leave the application.
Store the discs in a safe place for future use.

Creating an Application and Driver DVD

You can use QDataTrove to create a disc that includes
applications and drivers that are bundled with your Joybook.
1. Click the button to select Create Application and
Driver DVD.
2. Select a disc type from the Disc Category drop-down menu.
Click OK to proceed.
3. Insert a blank disc when prompted to do so, and then click
Yes.
4. Select your preferred burning speed, and then click OK.
5. The disc burning process starts. A Create Application and
Driver DVD window appears on the screen and displays the
current status.
Please note that the burning process cannot be interrupted
once started.
6. After disc burning finishes (the progress bar shows 100%
completion), click the close (cross) button at the top right
corner of the window to proceed.
7. Click Exit and then Yes to leave the application.
Store the discs in a safe place for future use.
Recovering your system using QDataTrove 49