Search And Play - Panasonic WJ-HD309A Network Operating Instructions

Search and play

Search for the desired recorded image and play it.
The 4 ways to search are as follows.
• Search for a recording event and play it (Recording event search) (page 23)
• Search for a motion detected time and date from the recorded images and play it (VMD search) (page 27)
• Search for a marked point and play from that point (Marking search) (page 31)
• Search for copy data (Copy Data Search) (page 33)
The available "search and play" methods are different depending on the selected recording area as follows.
When "HDD normal area" or "event recording area" is selected as the recording area
• Recording event search (page 23)
• VMD search (page 27)
• Marking search (page 31)
When "HDD copy area" is selected as the recording area
• Recording event search (page 23)
• VMD search (page 27)
When "COPY1" or "COPY2" is selected as the recording area
• Copy Data Search (page 33)
Note: Recorded images will be played in a single screen on monitor 2 and the VGA monitor. Click the 4-split screen
button, the 9-split screen button or the 16-split screen button to display in a multi-screen.
Search for a recording event and play it (Recording event search)
Display a list or thumbnails of recording events and select the desired one to be played.
This feature is available only when "HDD normal recording area", "event recording area" or "HDD copy area" is set
as the recording area. When "COPY1" or "COPY2" is selected, this feature is not available.
Recording events can be searched by filtering as follows.
About filtering
Conditions for filtering
Time and date
Camera channel
Event
Text
How to search
Designate a time period and search images recorded in the designated period to
play.
Searches for images from the selected camera channel only.
Searches for images from the selected recording mode only. The following
recording modes can be selected.
• Manual: Manual recording (Refer to page 14.)
• Schedule: Schedule recording (Refer to the provided Operating
Instructions for further information.)
• Emergency: Emergency recording (Refer to the provided Operating
Instructions for further information.)
• Video Loss: Recording performed at a video loss (Refer to page 46.)
• VMD: Recording performed by a motion detection function
(Refer to page 46.)
• TRM: Recording triggered by a terminal alarm (Refer to page 46.)
• COM: Recording triggered by a command alarm (Refer to page 46.)
Searches only images recorded with text information.
23