Table of Contents
Advertisement
Application Scenario
No parameters are provided by your service provider. The
IP address is automatically assigned by the service
provider.
4.
Select the uplink way in WAN port.
−
LAN2/WAN：LAN uplink. The PT530 will access the Internet through the network
cable.
−
Powerline Port：Powerline uplink. The PT530 will access the Internet through the
network cable.
When you set the PT530's connection type to Bridge, then the PT530 will work in bridge
mode.
5.
Configure the PT530's Internet parameters.
−
If you choose PPPoE or Static IP, enter the parameters provided by your service
provider, and click Apply.
24
Connection Type
Dynamic IP
Hide quick links:
Advertisement
Table of Contents
