Wind Sensor; Rain Gauge; Outdoor Temperature / Humidity Sensor; Getting Started - Oregon Scientific WMRS200 User Manual

WIND SENSOR

1
2
3
1. Wind direction
2. Wind vane casing
3. Anemometer
4. Solar power socket

RAIN GAUGE

Base and funnel:
1
1. Rain Gauge
2. Battery compartment
3. RESET button
1
2
1. Funnel
2. Indicator
OUTDOOR TEMPERATURE / HUMIDITY
SENSOR
4
1
2
1. Temperature / humidity sensor casing
2. Solar power socket
3. RESET button
4. Battery compartment
2
3

GETTING STARTED

SET UP REMOTE WIND SENSOR

The wind sensor takes wind speed and direction
readings.
The sensor is battery operated.
transmitting data to the USB communications hub
wirelessly within an approximate operating range of
100 meters (328 feet).
IMPORTANT Ensure that the wind sensor is pointing
North to enable it to record accurate readings.
NOTE The sensor should be positioned in an open
area away from trees or other obstructions.
To insert batteries:
1. Unscrew the anemometer from the wind sensor
carefully.
2. Insert batteries matching the polarities (+ / -) and
replace the anemometer. Press RESET after each
battery change.
3
It is capable of
2
1
3
4